Reflow Systems
We offer entry level reflow systems for prototyping and small level production from our partner Mekko Technologies right through to the industry’s leading supplier for reflow soldering technology Rehm Thermal Systems of Germany.
Rehm is the benchmark for other convection reflow makers. Their systems do not compromise process and ongoing cost of ownership. Also, Rehm is a supplier of the best vapor phase/vacuum soldering solutions available on the market, offering better control, lower galden usage and full profile flexibility not seen in other system today.
The Euroflow 250C is the smallest PC controlled reflow in the range, perfect for small design shops, prototyping and small scale production.
Like all the Euroflow Range – Heating is combination IR and Convection with cross profile zones as well as process travel zones.
Main Features :-
- PC Software Control and built in 3 channel profiler
- 250mm wide conveyor
- Heated length = 600mm + 300mm cooling zone
- Euroflow cross-belt temperature control with PC computer control system
- Maximum heater power 3.8kW
- Average power 2.0kW
The Euroflow 300C is the middle sized Euroflow system for small design shops, prototyping and small scale production. Features longer heated tunnel length and wide belt conveyor.
Like all the Euroflow Range – Heating is combination IR and Convection with cross profile zones as well as process travel zones.
- PC Software Control and built in 3 channel profiler.
- 300mm wide conveyor
- Heated length = 900mm + 300mm cooling zone
- Euroflow cross-belt temperature control multi cross zones.
- Maximum heater power 5.7kW
- Average power 3.0kW
The VisionXC, Rehm meets the request of electronic manufacturers with smaller batch sizes to offer a cost-effective system which still corresponds to the demands placed on it with regard to process performance. The VisionXC is available with a reduced option package suited to the needs of these customers.
VisionXC – compact design with best thermal performance!
Main Features
- Same industry leading heating system as used in all VX series.
- Effecient high MTBF three phase blowers.
- Heavy duty construction stainless steel tunnel for long life time.
- Robust transport systems, single and dual lane available.
- Lowest total cost of ownership in energy and N2.
- Optional N2 equiped version.
- Designed for 24/7 Operation.
- Powerful Rehm VisuII user operation software.
VXS has evolved from the highly successful VisionX series. With this system Rehm makes no compromises where process reliability and ease of maintenance are concerned. TheXS systems are Rehms more economical solution compared to their VXP series, but offer same basic thermal preformance as all the VX Series models.
Systems can be supplied as air atomosphere only , or nitrogen/air.
Main Features
- Same industry leading heating system as used in all VX series.
- Effecient high MTBF three phase blowers.
- Heavy duty construction stainless steel tunnel for long life time.
- Robust transport systems, single and dual lane available.
- Lowest total cost of ownership in energy and N2.
- Optional Pyrolsis Flux Management System for N2 version
- Designed for 24/7 Operation.
- Powerful Rehm VisuII user operation software.
- Fully CE approved and certified standard.
The VXP series reflow are Rehm’s Premier systems offering many advanced features as standard. This series of machines set the benchmark for all other reflow vendors to try and match. These systems come as N2 atmosphere equiped as standard and can run with compressed air or N2.
Main Features:
- Strongest heating and cooling power in the industry.
- Effecient high MTBF three phase blowers.
- Heavy duty construction.
- Stainless steel inner and outer tunnel.
- Robust transport systems. Single and Dual lane available.
- Innovative low thermal mass centre support system.
- Efficient residue management featuring ‘Pyrolysis’ as standard
- Best energy balance, kW per PCB production rate, and cleanest process tunnel in industry.
- Optimal nitrogen control, lowest real consumption in industry
- Lowest Cost-of-Ownership
- Designed for 24/7 Operation
- Powerful User Operation Software
- Easy accessibility for maintenance
- Fully CE approved and certified standard
The Condenso range of Vapor Phase Soldering Solutions are the industry’s best solution for hi-reliability and repeatability soldering.
These systems target medical, power supplies, military, avionic and hi-reliability industrial electronics.
Features:
- Top quality soldering results, best in industry
- Uses Rehms Patented galden injection on demand technology.
- Lowest galden usage in industry lowers cost of ownership.
- Pin point temperature accuracy over entire profile.
- Full truely repeatable ramp rate control on profile.
- Improved repeatability of thermal transfer control over traditional vapor phase systems
- Optional fully controlled void-free vacuum soldering
- No PCB movement during entire soldering process
- No pre-heat necessary stages required
- Can be used as a cure batch oven when not soldering – adhesives , coatings etc.
” If you want truely the best Vapor Phase System available then look no further than Rehms Condenso Range “
Copyright 2012 © Web Design Sydney :: Hoppingmad
