Electronic Cleaners

 
Oven  No4  is designed to remove flux stains in
reflow equipments and other surfaces.
Exceptional cleaning power and Easy to use.

Oven No4 is solvent emulsion that completely dissolves deposits on
reflow oven components.
It provides a perfect clean surface after rinsing with water leaving a pleasant smell.

 
Topklean EL-60 has been specially developped for the removal of flux residues and undesirable contaminants from Printed circuit boards assembled in the electrnics industry.

It is based on oxygenated solvents and has little impact on the environment then tradional cleaner.

Topklean EL 606 has be designed for stencil and missprinted circuit board cleaning.

No rinsing is required.

Promoclean Disper 605 is a water-based cleaning solution designed for Stencil and
missprint PCB cleaning.

Ideal for immersion or spray systems.

Cleaning and flux removal solvent for electronic assembly. PROMOSOLV 70ES has been developed as a specialty solvent to clean the residues from solder pastes and solder fluxes. PROMOSOLV 70ES of INVENTEC is an azeotropic formulation of the methoxynonafluorobutane(C4F9CH3), 1,2-trans-dichloroethylene and ethanol. PROMOSOLVTM 70 ES is clear, colourless and has a slight odour. It is designed to replace the existing solvents having an ODP and to be used with ultrasonic cleaning. Its medium range boiling point and its very low surface tension provide the PROMOSOLVTM 70ES with outstanding flux removal and drying characteristics when used in vapour phase with azeotropic mixtures.

The PROMOSOLV 70ES formulation provides an increased solvency power over the PROMOSOLV 70. This High-Tech fluid has no ODP. Its chemical stability and its very low toxicity result in a product that is safe to use and that is environmentally friendly.